SV650.org - SV650 & Gladius 650 Forum

Page 1 of 2

Show 40 post(s) from this thread on one page

SV650.org - SV650 & Gladius 650 Forum (http://forums.sv650.org/index.php)

- Guildford Massive (http://forums.sv650.org/forumdisplay.php?f=118)

- - Scrounging a drill (http://forums.sv650.org/showthread.php?t=149634)

Stu	09-04-10 12:09 AM

Scrounging a drill

would like to borrow a hammer drill with a 12mm wide chuck to install my ground anchor if anyone could oblige [-o<

Thanks

FG1	09-04-10 12:11 AM

Re: Scrounging a drill

Stu, I will have a look if mine will go to 12mm.
Will you be at Soho ?

timwilky

09-04-10 06:46 AM

Re: Scrounging a drill

Call yourself a man and you don't own a collection of drills

Even my mother has a hammer drill that would be suitable.

you big southern jessie.

keith_d

09-04-10 07:55 AM

Re: Scrounging a drill

If a regular drill can't hack it let me know and I'll pop over one evening with my SDS drill. That'll go through most building materials.

Keith.

dirtydog

09-04-10 08:02 AM

Re: Scrounging a drill

Quote:

Originally Posted by Stu (Post 2237827)

would like to borrow a hammer drill with a 12mm wide chuck to install my ground anchor if anyone could oblige [-o<

Thanks

More than likely I have, my SDS would be best if you're drilling into concrete. will need to check i'f i've got a 12mm masonry bit for it though.

Quote:

Originally Posted by timwilky (Post 2237860)

Call yourself a man and you don't own a collection of drills

Even my mother has a hammer drill that would be suitable.

you big southern jessie.

Don't tar us all with Stus brush I have several drills :smt019

Stu	09-04-10 11:23 AM

Re: Scrounging a drill

Quote:

Originally Posted by dirtydog (Post 2237901)

More than likely I have, my SDS would be best if you're drilling into concrete. will need to check i'f i've got a 12mm masonry bit for it though.

It came with a masonry bit - that's the problem it's too big for my drill

Quote:

Don't tar us all with Stus brush I have several drills :smt019

:smt090 yes I only have 3 drills, none of which are suitable. :(

Stu	09-04-10 11:24 AM

Re: Scrounging a drill

The drill bit I have is not SDS, just a regular drill bit - are SDS bits different?

Stu	09-04-10 11:28 AM

Re: Scrounging a drill

Oh, & the drill bit is 20mm, it just narrows at the chuck end to 12mm.
I have a bolt but will need to get a rawl plug

dirtydog

09-04-10 12:24 PM

Re: Scrounging a drill

Quote:

Originally Posted by Stu (Post 2238101)

:smt090 yes I only have 3 drills, none of which are suitable. :(

Poor show there Stu ;)

Quote:

Originally Posted by Stu (Post 2238104)

The drill bit I have is not SDS, just a regular drill bit - are SDS bits different?

Yep they are.

Quote:

Originally Posted by Stu (Post 2238107)

Oh, & the drill bit is 20mm, it just narrows at the chuck end to 12mm.
I have a bolt but will need to get a rawl plug

In that case could probably use my SDS drill with the normal chuck adapter, will need to check later that all the bits are there for that (van is off being MOT'd at the moment)

Edit: Don't use a rawl plug you'll need a sleeve anchor or shield anchor or if you already have the bolt you'll need a drop in anchor

Stu	10-04-10 04:39 PM

Re: Scrounging a drill

Success!

Thanks dd.

:D

All times are GMT. The time now is 05:18 AM.

Page 1 of 2

Show 40 post(s) from this thread on one page