GSXR front end question, (again).
 

I have a 1997 srad 750 front end and it all seems to fit my sv nicely apart from the head bearings what do i do about those?

Re: fork swap
 

twf website iirc
twin works factory

Re: fork swap
 

or swap the stems and use original bearings, which is what i did

Re: fork swap
 

Can I just bash out the stems from the yokes with a hammer and swap them over?

Re: fork swap
 

no you'd need to take them to an engineering place or someone with a press as it takes about 5-7 tons to push them out and put them in plus the sv stem will need pinning into teh gsxr yoke, depending on labour it will probably be cheaper to buy the bearing from TWF as IIRC its about 50 quid??

my stem swap was free so i worked out financially well to do it :lol:

Re: fork swap
 

OK,bearing from TWF it is,thanks.

Re: fork swap
 

http://www.twfracing.com/images/zpar...earing_lg.jpeg
Buy that.


Put the hammer down (you will not hear me say that much in this context!)

Re: GSXR front end question, (again).
 

And now the srad rear shock wont fit because of the battery box...

Re: GSXR front end question, (again).
 

They don't, you need to space the undertray down from the subframe an inch or so and chop the back of the tank hinge off IIRC