53mm dia light brackets for USD forks
 

What light brackets are about that support USD forks i cant seem to find any that go over 48mm in the uk i need up to 53mm diameter

thanks

Re: 53mm dia light brackets for USD forks
 

This sort of thing? http://www.aztechbikebits.com/tear-drop-headlight-brackets-96-p.asp

Re: 53mm dia light brackets for USD forks
 

more like this

http://cgi.ebay.co.uk/Headlight-Brac...item414d796c21

ps cheers for posting those up i think i may just have found my clock brackets ;)

Re: 53mm dia light brackets for USD forks
 

http://www.mandp.co.uk/productinfo/5.../On-Two-Wheels
I have some of them for sale, if you're interested let me know and I'll get you the diameter (without the supplied rubber)

Re: 53mm dia light brackets for USD forks
 

if you could that would be good, 53mm is the max not sure what the forks OD are yet ether 53mm or 51mm

Re: 53mm dia light brackets for USD forks
 

I'll grab em out the garage when I gets chance, with the rubber it's like 35mm dia but the rubber's ridiculously thick so you may get away with a bit of inner tube (I can give you some if you need it). Anyhoo I'll let you know.

Re: 53mm dia light brackets for USD forks
 

cool cheers :D

Re: 53mm dia light brackets for USD forks
 

I used high quality stainless hose clamps and a bit of hockey tape under them to prevent scratching.

Similar to these:

http://www.aapsa.com.au/awshop/images/GBS-LRG.jpg

On the bike:

http://i162.photobucket.com/albums/t...1020250_sm.jpg

Re: 53mm dia light brackets for USD forks
 

^ how did you manage to fit the lights to that then ?

Re: 53mm dia light brackets for USD forks
 

Just added a pic. I didn't have the ears (mine was an S to start) and i was using a Vrod headlight, so I made my own out of thin sheet Al with a hacksaw, file, and drill.