![]() |
standard fork caps for curvy (99 - 02)
Hi folks,
Anyone got a pair of standard fork caps for a curvy that they don't need please? Got a set of adjustable pre-load ones in from a pointy but find in the cold and wet there's just a bit too much pre-load on even with them wound right out, and the front feels very nervous. cheers charlie |
Re: standard fork caps for curvy (99 - 02)
cut the spacers in the forks, much cheaper than buying the caps, i think you would need to take about 10mm of maybe even less
|
Re: standard fork caps for curvy (99 - 02)
Just make some shorter spacers :)
|
Re: standard fork caps for curvy (99 - 02)
Both good suggestions, but I'm not running any spacers with the adjustable caps. The standard spacer for the WP progressive springs would be 25mm, which is more or less the same as the extra height in the adjustable caps compared to the height of standard caps + spacer. Could always file down the adjuster as much as poss tho I suppose. Cheers.
|
Re: standard fork caps for curvy (99 - 02)
hmm something doesn't sound right, you sure its pre load thats your problem ? have you got the static sag set ? 25mm - 30mm i think is normal (no rider)
what weight are you ? progressive springs shouldn't be to hard to require no pre load at all |
Re: standard fork caps for curvy (99 - 02)
I will have a look in my shed, I'm sure i have have an old set of forks, will see if the tops are on :)
|
Re: standard fork caps for curvy (99 - 02)
I'll swap those for standard tops :-)
|
Re: standard fork caps for curvy (99 - 02)
Quote:
|
Re: standard fork caps for curvy (99 - 02)
Thick oil feels bloody orrible in cold weather, viscosity increases markedly.
You sure it is a preload issue, and not a rebound issue? Springs don't get stiffer in the cold. |
All times are GMT. The time now is 10:51 AM. |
Powered by vBulletin® - Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.