Curvy Front End Bits
 

Before they go on Ebay:
Left over after GSXR conversion, all good straight low mileage stuff. 2000 Curvy.

Forks had new Hagon progressive up rated springs and heavy weight oil. £85 Sold

Front wheel (few marks) Small ding £50

Front wheel spindle £10

2 front discs £50 Sold to Cammy

2 front callipers. Just before the change over, the front callipers where striped and overhauled with new seals and rubbers (genuine Suzuki parts) and pads (H&H). £50

Twin Goodridge braided hoses, bit rough and signs of rust on the hoses since being left. Goodridge have sent me a free rear replacement for the same problem, so might do the same if you asked them. £15

Front master cylinder and reservoir £25

Front brake lever £10 Sold to Cammy

Lower triple £20

Upper triple £15 Sold

Stem bearings £5

Front fender (mud guard)with pyramid fender extender in the best colour, (pearl helis red Y7M in case you didn’t know) couple light marks with fixing brackets and bolts. £25

Left clip on £15 Sold

Right clip on £15 Sold

Would prefer collection from Fordingbridge or Southampton but will post at cost, or if nice and sunny meet up somewhere.
Mike
http://i185.photobucket.com/albums/x...DSC_0023-1.jpg

Re: Curvy Front End Bits
 

How much are you looking for the brake discs thanks Cammy

Re: Curvy Front End Bits
 

Cammy
£50

Re: Curvy Front End Bits
 

I will take them and if you could let me know how much the postage will be. Will transfer the money through Pay pal if thats ok.

Re: Curvy Front End Bits
 

I would be interested in the brake lever on its own not the reservoir or cylinder thanks

Re: Curvy Front End Bits
 

Discs and front brake lever sold to Cammy. Thanks

Re: Curvy Front End Bits
 

Hi How much for the calipers and lines,posted to cardiff S.wales pleae.

Cheers
Lee D

Re: Curvy Front End Bits
 

I'll go and weigh them.
Mike

Re: Curvy Front End Bits
 

Just under 3Kg, so £74 for both callipers and lines.
Mike

Re: Curvy Front End Bits
 

Disks came well pleased thanks :D