SV650.org - SV650 & Gladius 650 Forum

SV650.org - SV650 & Gladius 650 Forum (http://forums.sv650.org/index.php)
-   SV Talk, Tuning & Tweaking (http://forums.sv650.org/forumdisplay.php?f=111)
-   -   Chain and sprockets for K7S - what sizes? (http://forums.sv650.org/showthread.php?t=152309)

daveb 28-05-10 02:25 PM

Chain and sprockets for K7S - what sizes?
 
Ok - I'm fitting new chain and sprockets but am having some trouble locating the right kit.

The kits available on the interweb are saying either: 15front, 45rear and 110 link chain (unfaired) or: 15front, 44rear and 108 link chain (faired) - 114 link chain for ABS.

My bike is a K7 650s faired model and has the original chain and spocks and they are 15front, 45rear and 108 link chain but this kit doesn't seem to be available - it's either a 44rear with 108 link chain or 45rear with 110 link chain...

what gives...?

:confused:

daveb 28-05-10 08:11 PM

Re: Chain and sprockets...
 
Bump...

james160987 28-05-10 10:21 PM

Re: Chain and sprockets for K7S - what sizes?
 
i thought faired was 44t, (04 model is anyway)

anyway- i had 44 rear 15 front 108 link chain, got 46 sprocket, got 112 link chain but had to take a link out as to long) ( with a 46 rear the reccomened lenght (jhs racing said) is 110 link,

therefore if i was you i would just order the 110 link chain, 45 rear, it will go on not a problem,

i do have a 108 520 pitch iris gold chain going cheap if its of any intrest to you (id expect would be fine with a 45t rear), brand new, still in box, box bit tatty,, ( £60 posted),

Teabag 29-05-10 06:53 AM

Re: Chain and sprockets for K7S - what sizes?
 
Your are right, from K7 on the S has 15:45. There don't seem to be kits available, but you could always get the parts seperately or go iwth the 15:44 kit which will raise you gearing a little bit.
I am now running 16:45 on my K7 whihc has made it more relaxing on m-ways but take away a bit of the acceleration.

daveb 29-05-10 09:41 AM

Re: Chain and sprockets for K7S - what sizes?
 
Thanks Teabag, I wasn't going crazy then! I have asked the supplier of the kit to substute the 44 for a 45 which he was weary of doing - it's obvious that the suppliers need to update there kits to allow for K7 on models.

thanks for replies people...

D

yorkie_chris 29-05-10 10:13 AM

Re: Chain and sprockets for K7S - what sizes?
 
Buy from b and c express if you tell them what you want they will send it


All times are GMT. The time now is 11:21 AM.

Powered by vBulletin® - Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.