stubby brake levers for k3... k9/10 fit?
 

Got a k3 pointy, just found these levers on fleeceBay
http://cgi.ebay.co.uk/ws/eBayISAPI.d...=STRK:MEWAX:IT

says they're for k9/10, will they fit my K3?!

any help:-?

Re: stubby brake levers for k3... k9/10 fit?
 

Hmmm, they look OK-ish.
I would have thought they would fit a K3.

Call me dubious, but I don't really trust the "cheapy" stuff...........I mean, going by your sig, you're not afraid of quality stuff and the prices associated with it. Why start skrimping and scraping now!?

Re: stubby brake levers for k3... k9/10 fit?
 

Tbh if they fit they wont be that bad. alot of people on the gixxer forum have these cheapy pazzo lookalikes and say their pretty dam good.

Re: stubby brake levers for k3... k9/10 fit?
 

I'm pretty certain they'll fit, you could either ask the ebay seller, wait for someone more knowledgeable or you could go to a suppliers site (wemoto ?) and search for brake levers for the k3 then the k9 see if it produces the same part?

Could you let us know how you get on with them?

P.s where about in sheffield are you?

Re: stubby brake levers for k3... k9/10 fit?
 

In the listing it states sv1000 witch has an hydraulic clutch. So first would check that they fit a cable clutch

Re: stubby brake levers for k3... k9/10 fit?
 

@pms jones
yeah i noticed that but the title itself says sv650? i'll send a msg to the seller and check it out....

had a look about but can't really find much info bout k9/k10 models so assume (dangerous i know) it's still the same, part numbers between k3 and k7 are the same.... not aware of any major overhauls to the SV since 2003 soooo...

@dave20046
Down in meersbrook, when not workin away or climbin/riding in the peak;)

Re: stubby brake levers for k3... k9/10 fit?
 

ok part numbers;
57300-44g00 & 57300-10g20 brake lever
57500-10d01 & 57500-10d20 clutch lever
they seem to be interchangeable, found a bit of posts about the difference, to do with ABS but they both seem the same anyway

searchin for the part numbers gives a few crossovers which are handy
http://www.accesscycle.com/product.a...Prod_tbKey=722
GSR600'06-07 GSF1200Bandit: DL650'07
the gsr is on the list for the ebay listing...

BUT that doesn't mention sv?!

part numbers from here http://fiche.ronayers.com/Index.cfm/...28MODEL_K7%29_

oh, for the simple life!

Re: stubby brake levers for k3... k9/10 fit?
 

btw that crossover bit is for brake lever

Re: stubby brake levers for k3... k9/10 fit?
 

right checked with the seller they def for sv650, will let you know how they are...

Re: stubby brake levers for k3... k9/10 fit?
 

That would be good as have been after adjustable levers.Just not paying 150 for pinzo