![]() |
Cut air filter, loss of power.
i have cut the centre out of my air filter (the hard plastic bit) and i have raised the front of the tank by about 3 mm.
however when i hit about 7000 revs im getting a loss of power. it still has the padding on the tank. i thought about removing it but it is stuck in fast and not loose so i cant see that being the problem especially as it didnt do it before i changed the filter any ideas? i am thinking of putting the old one back on now its a 2002 curvy cheers dave |
Re: Cut air filter, loss of power.
To clarify: You have a curvy (2002) SV650 and have widened the plastic entry hole in the centre of the air filter to make it more free flowing?
If this is the case, put the old one back in and see how you go. My suspicion is that the mixture may become leaner at high RPM as the carbs are not suited to the non-standard filter. If the problem goes away with the old filter fitted you have your answer ;) Jambo |
Re: Cut air filter, loss of power.
cheers i had a feeling that might be it, thought i would post and see.
the extra 3 mil clearance at the front of the tank shouldnt matter should it? |
Re: Cut air filter, loss of power.
Quote:
Jambo |
Re: Cut air filter, loss of power.
cheers, im going to put the old filter in and give it a bash with the extra 3 mil clearance, if it still struggles ill keep the old filter and remove the 3 mil
many thanks |
Re: Cut air filter, loss of power.
I'd say with a fair degree of confidence that it's running as lean as a starving crackhead through iceland.
|
Re: Cut air filter, loss of power.
my fault! i gave him the filter to cut up as i put a k&n in mine.
|
Re: Cut air filter, loss of power.
can run alright like that, but you need to rejet.
|
Re: Cut air filter, loss of power.
i recall something you said about 5 quids worth of mikuni jets would sort the problem, is that correct? what size did you mention?
|
Re: Cut air filter, loss of power.
he just wants to be able to keep up with me!
|
All times are GMT. The time now is 12:09 PM. |
Powered by vBulletin® - Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.