SV650.org - SV650 & Gladius 650 Forum
Page 1 of 3 1 23
Show 40 post(s) from this thread on one page

SV650.org - SV650 & Gladius 650 Forum (http://forums.sv650.org/index.php)
-   Bikes - Talk & Issues (http://forums.sv650.org/forumdisplay.php?f=129)
-   -   HID for a naked bike ? (http://forums.sv650.org/showthread.php?t=155106)

barwel1992 24-07-10 10:41 AM
HID for a naked bike ?
 
looking at HID kits at the moment and im wondering where people are putting the ballasts and stuf on a naked bike ?

this is the kit im looking at LINK any one ever used that kit ?

id like to think i could stick the ballast at the back of the bike some where but not sure.

any pictures of the kit installed would be use full

Miss_Undaztood 24-07-10 12:03 PM
Re: HID for a naked bike ?
 
Quote:
Originally Posted by barwel1992 (Post 2327637)
looking at HID kits at the moment and im wondering where people are putting the ballasts and stuf on a naked bike ?

this is the kit im looking at LINK any one ever used that kit ?

id like to think i could stick the ballast at the back of the bike some where but not sure.

any pictures of the kit installed would be use full
The ballast bits dont seem huge, so how about mounting them on the inside of the frame somewhere, under the tank, similar to the reg/rec ?

barwel1992 24-07-10 12:41 PM
Re: HID for a naked bike ?
 
yeh thats what i was thinking, the only thing is its already very cramped under the tank as i have loads of the front wiring loom shoved down there

Miss_Undaztood 24-07-10 01:06 PM
Re: HID for a naked bike ?
 
Don`t know how much heat the ballasts give out either.
Or, how about behind the rear seat, side plastic panels, fixed to the frame somehow.

barwel1992 24-07-10 02:52 PM
Re: HID for a naked bike ?
 
That's the sort of thing that I want to do, I have found some extension wires on the site so I should be able to do that some how but i don't know how until I get it I suppose

yorkie_chris 24-07-10 02:55 PM
Re: HID for a naked bike ?
 
I got rid of rad expansion tank and put it in there. Hang expansion tank in front of rad instead. Horn compressor and ballast fit in that space.

barwel1992 24-07-10 07:38 PM
Re: HID for a naked bike ?
 
would the 3rd one down do YC ? LINK

yorkie_chris 24-07-10 08:50 PM
Re: HID for a naked bike ?
 
Quote:
Originally Posted by Miss_Undaztood (Post 2327662)
Don`t know how much heat the ballasts give out either.
Not a lot

yorkie_chris 24-07-10 08:52 PM
Re: HID for a naked bike ?
 
Quote:
Originally Posted by barwel1992 (Post 2327799)
would the 3rd one down do YC ? LINK
I used a £2.49 kids drinks bottle sprayed black... spend £50 if you want :smt110

barwel1992 24-07-10 09:02 PM
Re: HID for a naked bike ?
 
rofl :D you like rat i like bling :P

do you know what ID the tube is for the catch tank ? (not near the bike atm)

PS i more thinking this now LINK


All times are GMT. The time now is 02:08 PM.
Page 1 of 3 1 23
Show 40 post(s) from this thread on one page

Powered by vBulletin® - Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.