SV650.org - SV650 & Gladius 650 Forum - Centre stand for a Curvy

SV650.org - SV650 & Gladius 650 Forum (http://forums.sv650.org/index.php)

- SV Talk, Tuning & Tweaking (http://forums.sv650.org/forumdisplay.php?f=111)

- - Centre stand for a Curvy - where from? (http://forums.sv650.org/showthread.php?t=157105)

rharrington0

05-09-10 07:58 PM

Centre stand for a Curvy - where from?

Hi Lads,
I'm after a centre/main stand for my SV65Os K2.
It only has a side stand.
I've been looking on ebay for ages and can't see any about. Has anybody got any ideas where i could pick one up?

Also, is there a crush bung/bobbin available for the bike that doesn't involve cutting one of my lower fairings?

Thanks Lads in advance,

Ronnie :cool:

maviczap

05-09-10 08:17 PM

Re: Centre stand for a Curvy - where from?

So long as you've still got the standard exhaust fitted, then Wemoto sell a centre stand for the SV.

None were fitted as standard

http://www.wemoto.com/bikes/Suzuki/S...ntrestand_Kit/

Its £164!!!!

A better buy for your money would be an ABBA stand, does the same job, but isn't permanent. I leave mine on the ABBA stand in the garage.

About £100 new or cheaper 2nd hand on ebay, remember to buy the adaptors for the SV

http://motors-parts.shop.ebay.co.uk/...=p3286.c0.m282

rictus01

05-09-10 08:18 PM

Re: Centre stand for a Curvy - where from?

here you go "Link"

maviczap

05-09-10 08:19 PM

Re: Centre stand for a Curvy - where from?

Quote:

Originally Posted by rharrington0 (Post 2361692)

If you've got the Curvy lower fairings like mine (see my album pictures) then R&G crash bungs don't require you to cut the lowers.

Just make sure you order the correct ones for curvy with lowers

All times are GMT. The time now is 01:41 AM.