curvy rear brake slave cyl required.
 

Hi all, Im looking for a curvy rear brake slave cylinder, must be in working order please.

One of the mounting bolts has siezed big time on mine, and requires drilling out, and a helicoil, so thats a job for another day.

Thanks, Lee

Re: curvy rear brake slave cyl required.
 

FYI they are generally called caliper not slave cylinder

Re: curvy rear brake slave cyl required.
 

you needing a rear brake caliper?-£45 delivered just been serviced ready to fit -NO BRAKE PADS

Re: curvy rear brake slave cyl required.
 

see here, the housing that bolt number 10 is going into, not a caliper tho surely???

http://fiche.ronayers.com/Index.cfm/...ASTER_CYLINDER

Re: curvy rear brake slave cyl required.
 

Lee, you're correct, it is the rear master cyclinder assembly you're looking for

Sorry, not one in my spares, but its a common part on other Suzuki's

http://www.google.co.uk/#sclient=psy...d0e28c5feefbb9

Re: curvy rear brake slave cyl required.
 

Thanks Richard, had a little look on ebay, couldnt find an sv one, but will look for others that fit, ;)

Does K3 use the same unit?

Re: curvy rear brake slave cyl required.
 

If you post the part number and description in here, then you'll get one cheap enough, as its a common part?

http://www.bike-breakers.info/

Have you been to the breakers on Colchester Hythe, motorcycle recycle I think they're called

http://stores.ebay.co.uk/motorcycle-recycle1

Re: curvy rear brake slave cyl required.
 

I have one , check my sig.

Re: curvy rear brake slave cyl required.
 

Hi dave, sorry in the meantime of this topic i found one on ebay from an `06 suzuki and matched upto mine.

Thanks for the offer though :cool: