SV650.org - SV650 & Gladius 650 Forum

SV650.org - SV650 & Gladius 650 Forum (http://forums.sv650.org/index.php)
-   Mini-Twins (http://forums.sv650.org/forumdisplay.php?f=151)
-   -   minimal loom (http://forums.sv650.org/showthread.php?t=158802)

rvracing 16-10-10 09:24 PM

minimal loom
 
does anyone have a schematic of a minimal racing loom, just sparks and charging for yr 2000 curvy tar alot rob:)

Berlin 17-10-10 09:19 AM

Re: minimal loom
 
Yorkie Chris did mine for me and I think I'm down to about 10 wires total. :)

Three from the kill switch, three from the battery. A relay for the starter and then back to the ECU (6) and two for each coil. However, I have no idea what he looped/put a resistor in/bypassed in doing this. The side stand switch and the clutch switch were the issues. I'm still not sure if the TPS needs to be wired in or not :) Doesn't seem so.

Best PM Yorkie Chris (if he's coherent after Dave's Birthday :) ) and ask him.

Bike Electrics are a mystical beast to me.

C

jrussell 30-10-10 07:10 PM

Re: minimal loom
 
See attached link
http://www.twfracing.com/vbforums/showthread.php?t=586

John

rick72 22-11-10 11:56 AM

Re: minimal loom
 
what about 1 for fuel injected?

jrussell 23-11-10 12:27 AM

Re: minimal loom
 
Look at some of the threads on TWFracing.com Its my understanding other than the ignition lock there is not alot more that can be stripped. Zoran had indicated it wasn't worth the effort. Look in the electrical/wiring section. There are a few posts about the 2nd gen.

John

rick72 23-11-10 11:43 AM

Re: minimal loom
 
will do thanks


All times are GMT. The time now is 03:42 PM.

Powered by vBulletin® - Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.