SV650.org - SV650 & Gladius 650 Forum

SV650.org - SV650 & Gladius 650 Forum (http://forums.sv650.org/index.php)
-   Photos (http://forums.sv650.org/forumdisplay.php?f=124)
-   -   I think my brake was binding (http://forums.sv650.org/showthread.php?t=159747)

mister c 14-11-10 06:43 PM

I think my brake was binding
 
Enough said :)
http://sphotos.ak.fbcdn.net/hphotos-..._6828899_n.jpg

Wideboy 14-11-10 07:34 PM

Re: I think my brake was binding
 
MOT'ed worse

;)

andrewsmith 14-11-10 08:19 PM

Re: I think my brake was binding
 
=D>

Talking brakes mine could do with a check and grease

mister c 14-11-10 09:50 PM

Re: I think my brake was binding
 
Quote:

Originally Posted by andrewsmith (Post 2421041)
=D>

Talking brakes mine could do with a check and grease

Done mine today. Mothballing the Daytona over the winter, so Custard is coming out of retirement.
She started 3rd hit of the button today after nearly 4 weeks sat in the shed :)
http://sphotos.ak.fbcdn.net/hphotos-..._2563052_n.jpg

http://sphotos.ak.fbcdn.net/hphotos-..._7658370_n.jpg

http://sphotos.ak.fbcdn.net/hphotos-..._3424571_n.jpg

Lozzo 14-11-10 10:23 PM

Re: I think my brake was binding
 
Quote:

Originally Posted by mister c (Post 2420964)

Don't think that's much to do with binding, more the pins were stuck and only one pad is hitting the disc properly. The pad that's lost its material has gone rusty behind the friction material and that's what's caused it to delaminte. I've seen it happen on a few sliding calipers. If the pistons were sticky too then you'd have had binding, but that's more a result of sticky pins.

mister c 14-11-10 10:40 PM

Re: I think my brake was binding
 
Quote:

Originally Posted by Lozzo (Post 2421157)
Don't think that's much to do with binding, more the pins were stuck and only one pad is hitting the disc properly. The pad that's lost its material has gone rusty behind the friction material and that's what's caused it to delaminte. I've seen it happen on a few sliding calipers. If the pistons were sticky too then you'd have had binding, but that's more a result of sticky pins.

The front wheel wouldnt move Lozzo, the right hand caliper had to be "eased" off using a mallet, but they are both nice & smooth now, just waiting for my new pads to arrive.

Quiff Wichard 15-11-10 03:18 PM

Re: I think my brake was binding
 
Quote:

Originally Posted by mister c (Post 2421118)
Done mine today. Mothballing the Daytona over the winter, so Custard is coming out of retirement.
She started 3rd hit of the button today after nearly 4 weeks sat in the shed





it usually takes three presses of the button to get mand goin too Col :smt103

mister c 15-11-10 07:50 PM

Re: I think my brake was binding
 
You, David, are a very naughty boy! ;)

Viney 15-11-10 08:11 PM

Re: I think my brake was binding
 
Quote:

Originally Posted by mister c (Post 2421118)
Done mine today. Mothballing the Daytona over the winter, so Custard is coming out of retirement.
She started 3rd hit of the button today after nearly 4 weeks sat in the shed :)
http://sphotos.ak.fbcdn.net/hphotos-..._2563052_n.jpg

http://sphotos.ak.fbcdn.net/hphotos-..._7658370_n.jpg

http://sphotos.ak.fbcdn.net/hphotos-..._3424571_n.jpg

I hope you took the slide off, removed the rubber gromet, cleaned the white stuff off, and refitted?

I must do my rear brake. Job fro Friday em thinks

barwel1992 15-11-10 11:10 PM

Re: I think my brake was binding
 
Quote:

Originally Posted by mister c (Post 2421118)
Done mine today. Mothballing the Daytona over the winter, so Custard is coming out of retirement.
She started 3rd hit of the button today after nearly 4 weeks sat in the shed :)
http://sphotos.ak.fbcdn.net/hphotos-..._2563052_n.jpg

http://sphotos.ak.fbcdn.net/hphotos-..._7658370_n.jpg

http://sphotos.ak.fbcdn.net/hphotos-..._3424571_n.jpg

should have bunged them in the dish washer (if you have one)

before
http://i357.photobucket.com/albums/o...2/P1040559.jpg

after
http://i357.photobucket.com/albums/o...2/P1040571.jpg

mum wasn't to pleased but ohh well lol


All times are GMT. The time now is 01:00 AM.

Powered by vBulletin® - Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.