sv650 s Curvy restrictor washers wanted ASAP!!
 

I need sv650 s restrictor washers asap!!

Re: sv650 s Curvy restrictor washers wanted ASAP!!
 

i can give you the diemensions of them if that will help and then you can get some made up?

i'd let you have mine but i still need them for a while :(

Re: sv650 s Curvy restrictor washers wanted ASAP!!
 

From looking at a curvy. How would you tell if its full power or restricted? Or whats the easiest way to tell by taking least amount of parts off?

Re: sv650 s Curvy restrictor washers wanted ASAP!!
 

Hello mate.

Just want to get things straight.

You have a curvy sv650 correct? (aka 99-02 model)
You want to restrict to 33bhp from full power?
You want the part that goes in the carburetor?

That would be part 6: Valve piston here CLICK

If so i have my old ones ill sell you them cheap cost me £40+ postage. I did use them so if I give them to you £20 posted? Seeing as you are a member of the org!

Re: sv650 s Curvy restrictor washers wanted ASAP!!
 

just by looking at them you cant. mines a curvy and restricted. it doesnt rev up to 9,000 like they should, it hits 7,500 and it tops out at 90 but i've had 100 with a tail wind :)

to look at the retrictors on a curvy you do this;

take off small panels under the front seat
then front seat off
front tank bolts off
lift tank up and put somthing in like a hammer to hold it up
take the airbox off
undo throttle cables( you might not have to but i do)
undo the hose clamp things under the carbs and then pull thenm off a bit(be careful becasue there are still fuel lines attached)


thats the easiest way that i no on how to do it. any questions just ask :)

Re: sv650 s Curvy restrictor washers wanted ASAP!!
 

Cheers Mykey.M We got a curvy with 217Km on the clock. Not been used since i got it for my wife and i wanted to know whether it was restricted or not with view to selling it.