![]() |
Battery not charging with lights on
My battery is not getting sufficient voltage to charge when the lights are on, put a multimeter across the battery and its getting 13v+ with the lights off but if I turn the lights on it drops to around 11.5. Proccess of elimination I guess to find the cause, first thing I will do is clean up the earth connections and see if that resolves it then next I guess its a reg/rec replacement? The battery has been replaced recently but the reg/rec is still the original oem part to my knowledge, bike has done 22,000 miles. Whats the general consensus? Ill let you know what was at fault when its sorted.
|
Re: Battery not charging with lights on
Don't buy a new regulator until you have checked all the connector contacts are clean and corrosion free. Dirty contacts = high resistance and a voltage drop; the more current you draw (eg lights on) the bigger the voltage drop. I'm sure many voltage regulators have been replaced unnecessarily beause of this: Of course a new regulator comes with shiny new clean contacts and appears to have fixed the problem!
|
Re: Battery not charging with lights on
When you checked the charge rate did you do the alternator output as well?Should read about 70 volts AC on all three coils.
|
Re: Battery not charging with lights on
Quote:
|
Re: Battery not charging with lights on
It's likely the reg rec but obviously eliminate everything before spending money.
No need for a poll either, there are various troubleshooting guides around from people who know what they're on about, why ask everyone who can click a button based on what their mate said 5 years ago? |
Re: Battery not charging with lights on
Quote:
|
Re: Battery not charging with lights on
Quote:
|
Re: Battery not charging with lights on
T'was the reg/rec. replaced it with a late model CBR600 item. I chopped the connectors off the old oem r/r and crimped them onto the new un. Plenty of leccy tape appplied and it looks almost standard. Perhaps not the most elegant solution but wanted to avoid chopping up the loom. Getting 13.8 v accross the battery at idle with lights on now.
|
Re: Battery not charging with lights on
Quote:
As a side note. Id advise cleaning all of the connectors up as well, it could help in the long and short term! |
Re: Battery not charging with lights on
Quote:
Yep that was the first thing I checked, they didnt look corroded but got a good blast of WD40 anyway. |
All times are GMT. The time now is 10:55 PM. |
Powered by vBulletin® - Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.