Cylinder head cleaning
 

Tools used: Gasket cleaning tools (silver line) Brake cleaner damped rag

Before:
http://farm6.static.flickr.com/5256/...813be9c5_z.jpg

Front after:
http://farm6.static.flickr.com/5267/...1a0650c6_z.jpg

Rear after:
http://farm6.static.flickr.com/5262/...59018c40_z.jpg

I was able to use the silverline gasket scraping tool to take off the gasket paint that was left baked on with little effort, also i was able to use them to take off the residue carbon around the inner part of the head above the valves. After that i wiped it down with the brake cleaner soaked rag i also used the rag to clean the valves gently but i realised the valves werent that bad upon touching them so i have left them. Any residue bits from scraping were carefully removed or blown away from the valve heads.