SV650.org - SV650 & Gladius 650 Forum - Engineering shop in Northwest

SV650.org - SV650 & Gladius 650 Forum (http://forums.sv650.org/index.php)

- Mini-Twins (http://forums.sv650.org/forumdisplay.php?f=151)

- - Engineering shop in Northwest (http://forums.sv650.org/showthread.php?t=168820)

hardhat_harry

18-07-11 02:11 PM

Engineering shop in Northwest

Currently building an ER6 Supertwin aka Farquar ER6 Spec but having a problems finding a good engineering shop Manchester / Liverpool area to manufacturer a spindle to mate a ER6 front wheel with ZX10R 2011 front end and remove 5mm from the mounting face of the radial caliper on the fork leg to fit a smaller ER6 brake disc.

Any suggestions?

Nobbylad

18-07-11 03:30 PM

Re: Engineering shop in Northwest

Have you tried Thomas Dolan's by Aintree Industrial Estate?

http://www.cylex-uk.co.uk/company/th...-14677199.html

hardhat_harry

18-07-11 04:24 PM

Re: Engineering shop in Northwest

cheers, r they any good?

Nobbylad

22-07-11 06:35 PM

Re: Engineering shop in Northwest

Yep...mate of mine is a mechanic round the corner and recommended them to me. They did some pretty custom stuff to fix a clutch linkage on my Renault Espace a year or two ago. Very friendly/approachable and see most jobs as an engineering challenge as opposed to work...if that makes sense?

All times are GMT. The time now is 07:54 AM.