Black fairing lowers - pointy
 

Black lowers off my K 8. RHS has some fairing rash from Anglesey, there are also light swirl marks in some places that can be seen very close up (would probably polish out). There is also a light scratch on the LHS lower at the top pictured below. Usual stone chips at the front where they join together.

The RHS panel has a Respro sticker on the indented bit near the crash bung. This will come off as per the other decals, however if you really like it, I can cut one to fit the other panel so they're the same! They look like this in car headlights....

http://i11.photobucket.com/albums/a1...d/IMAG0421.jpg

***PLEASE NOTE THAT THE PIC ABOVE IS NOT ONE OF THE PANELS BELOW, IT JUST SHOWS HOW REFLECTIVE THE RESPRO STICKERS ARE***

£100 delivered.

RHS panel

http://i11.photobucket.com/albums/a1...IMAG0662-1.jpg
http://i11.photobucket.com/albums/a1...d/IMAG0663.jpg
http://i11.photobucket.com/albums/a1...d/IMAG0665.jpg
http://i11.photobucket.com/albums/a1...d/IMAG0664.jpg

LHS panel

http://i11.photobucket.com/albums/a1...d/IMAG0666.jpg
http://i11.photobucket.com/albums/a1...d/IMAG0668.jpghttp://i11.photobucket.com/albums/a1...IMAG0667-1.jpg
http://i11.photobucket.com/albums/a1...d/IMAG0669.jpg

Pointy, fairing fitting kit, missing 4 x grommets and a spacer but will need to dig out and check exactly which bits.

http://i11.photobucket.com/albums/a161/nobbylad/kit.png

£45 delivered.

Re: Black fairing lowers - pointy
 

Hmm tempting, would you consider a deal on everything? Also, is it possible to buy the parts that are missing? And lastly, will these fit a K4?

Re: Black fairing lowers - pointy
 

Pm'd

Re: Black fairing lowers - pointy
 

Replied :)

Re: Black fairing lowers - pointy