curvy exhuast
 

after an exhaust for my curvy. let me know what you have

Re: curvy exhuast
 

What bit? I have a BOS end can, no link pipe. I have a full system that could be made to work but you need to be handy with sealing exhausts, its got lots of joins. I have a tatty scorpion street extreme with link pipe. Apparently the full system was originally BOS before some1 butchered it to fit the scorpion can.

Re: curvy exhuast
 

you got a price on the full system and the scorpian

Re: curvy exhuast
 

You can have it for £30 posted mate. The end can is really a mess, it will probably need polishing or rubbing down and painting. it melted the hanger it was on before and made a god aweful mess. It is loud, offensively loud. Putting the baffle in doesn't make a difference. I never got pulled over for it but i think that was just luck. The full system has been cut in a really **** place. The pipe just down from the cut is tapered so its really bad at sealing against the link pipe. Also you will need gaskets to seal the joins in the pipe. Only reason im asking for any money at all is the can was originally a £350 Titanium Scorpion Street Extreme.

I just wanted to be clear. Its yours if you want it. Pm me your address.

Re: curvy exhuast
 

i have a full standard system in good nic?

Re: curvy exhuast
 

Probably too late, but I'm selling one - HERE

Re: curvy exhuast
 

Even later, I also have one for sale http://forums.sv650.org/showthread.p...58#post2652158