SV650.org - SV650 & Gladius 650 Forum

SV650.org - SV650 & Gladius 650 Forum (http://forums.sv650.org/index.php)
-   Stuff Wanted (http://forums.sv650.org/forumdisplay.php?f=114)
-   -   wanted piston rings for a k5 (http://forums.sv650.org/showthread.php?t=173392)

muzza_sv 10-12-11 08:24 PM

wanted piston rings for a k5
 
after a set of rings for my k5 cant find any anywhere on the internet went to a local dealer today and they want £100 for a set just wondered if anyone knows anywhere i can get some cheaper, cheers

SV Mad 10-12-11 08:27 PM

Re: wanted piston rings for a k5
 
You could try http://www.wemoto.com/

Top customer service.

suzukigt380paul 10-12-11 09:11 PM

Re: wanted piston rings for a k5
 
looked up the price at robinsons foundry and £100 is the going rate,so whats up with the old rings,if youve done less then a 100k i would say they shouldn't be worn out

muzikill 11-12-11 10:02 AM

Re: wanted piston rings for a k5
 
Buy a micrometer and follow the guide in the manual to measure them before you shell out hard cash.

muzza_sv 11-12-11 11:07 AM

Re: wanted piston rings for a k5
 
yeah im going to measure them first just thought id look for some prices at same time and its done about 35000 miles but its going to be a track bike so though it best to fully re-build it before hand :)

suzukigt380paul 11-12-11 07:15 PM

Re: wanted piston rings for a k5
 
Quote:

Originally Posted by muzza_sv (Post 2636687)
yeah im going to measure them first just thought id look for some prices at same time and its done about 35000 miles but its going to be a track bike so though it best to fully re-build it before hand :)

my old ganddad always told me if it aint broke dont fix it,if it runs and dont use oil,and lets face it 35k aint far for a modern engine,most engines these days if looked after and have regular oil changes should last well over 100k

muzza_sv 11-12-11 11:02 PM

Re: wanted piston rings for a k5
 
I know yeah it has been burning oil mind which I'm pretty sure is the valve stem seals which I've got, just want to be sure lol

SV650Racer 12-12-11 03:03 PM

Re: wanted piston rings for a k5
 
Wemoto dont sell them.

Compression/leak test would tell the full story but yes if your rebuilding especially at that mileage id look at new rings/stem seals/cotters. They are prone to leak by slightly on the valves too when revved hard so its worth lapping in the valves properly too.

Piston ring sets I can do for £41.73 per set with org discount. You would also need 4 circlips total £4.57 for all four. Postage would be £3.75

muzza_sv 12-12-11 08:47 PM

Re: wanted piston rings for a k5
 
Quote:

Originally Posted by SV650Racer (Post 2637230)
Wemoto dont sell them.

Compression/leak test would tell the full story but yes if your rebuilding especially at that mileage id look at new rings/stem seals/cotters. They are prone to leak by slightly on the valves too when revved hard so its worth lapping in the valves properly too.

Piston ring sets I can do for £41.73 per set with org discount. You would also need 4 circlips total £4.57 for all four. Postage would be £3.75

sounds good to me mate will be a few weeks before i have money for them but ill give you a shout when i do


All times are GMT. The time now is 04:46 PM.

Powered by vBulletin® - Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.