![]() |
flickering brake light when front brake applied.
I have a naked pointy K7.
Indicators are fine, rear brake makes the brake light come on fine, headlamp is fine on main and dipped beam. But the front brake does something strange ... when I just move the lever to the "click" point, the brake light comes on. But when I move it further, it flickers and sometimes goes off completely. I have just fitted new brake lines, I don't think that would have anything to do with it though. Any ideas? |
Re: flickering brake light when front brake applied.
Have you checked the brake light switch on the front brake lever ? Check the connections on it.
My SV did something similar, I replaced the switch on the front brake lever and it solved it. |
Re: flickering brake light when front brake applied.
Ok thanks, I'll check it out. That would make sense given that the rest of the electrics are fine.
Also, I have been fiddling around with the master cylinder, connecting up the brake lines, so I could well have knocked the switch by mistake. |
Re: flickering brake light when front brake applied.
On a related question:
Quote:
|
Re: flickering brake light when front brake applied.
Ok, great I'll try that. I just had another fiddle, I think it is either the connector or switch - I can get it to work but only if I press the connector in a certain position.
|
Re: flickering brake light when front brake applied.
just had the same problem with mine, was the connector block to the lever. just try to push it back in straight or wiggle it a bit ;) thats what she said anyway/
|
All times are GMT. The time now is 05:05 PM. |
Powered by vBulletin® - Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.