![]() |
Sv 650 speedo drive cable needed for 2000 model
Does any one have one for sale maybe from an ex track bike or just one knocking about as mine has just started playing up
|
Re: Sv 650 speedo drive cable needed for 2000 model
Whats the drive doing?
|
Re: Sv 650 speedo drive cable needed for 2000 model
Was on ride home tonight and the speedo went from 70 on the motor way of corse to 0 the 50 to 0 the 60,70,60 then fixed it's self just lefties tank up to see if connectors are together which they are this has never happend before ?
|
Re: Sv 650 speedo drive cable needed for 2000 model
You need to clean the contacts on the connectors then test the drive to see if its at fault
|
Re: Sv 650 speedo drive cable needed for 2000 model
Do you mean the connectors under the tank for on the wheel sensor I presume it's a sensor any way :/
|
Re: Sv 650 speedo drive cable needed for 2000 model
It's more likely the rotor breaking up than the cable. It has also been known for a loose battery connection or other wiring fault to cause the clocks to jump around.
|
Re: Sv 650 speedo drive cable needed for 2000 model
The wheel sensor is a hall effect sensor, so if it goes wrong it would be broken circuit or a fully closed circuit sending a constant voltage.
The connector is under the tank and is a clear/ white under the air box near the headstock |
Re: Sv 650 speedo drive cable needed for 2000 model
Ye I seen that conector and checked it was clipped together will see how it goes on the way to work in the morning thanks for the help
|
Re: Sv 650 speedo drive cable needed for 2000 model
Have you had the front wheel off for any reason recently?If so id suspect the rotor got damaged when putting the wheel back on.Common problem.
|
Re: Sv 650 speedo drive cable needed for 2000 model
No not touched the front wheel is there a main dealer to price up new part just incase
|
All times are GMT. The time now is 10:48 PM. |
Powered by vBulletin® - Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.