SV650.org - SV650 & Gladius 650 Forum - Brake overhaul parts

SV650.org - SV650 & Gladius 650 Forum (http://forums.sv650.org/index.php)

- SV Talk, Tuning & Tweaking (http://forums.sv650.org/forumdisplay.php?f=111)

- - Brake overhaul parts - where from? (http://forums.sv650.org/showthread.php?t=174486)

munkygunn182

23-01-12 04:46 PM

Brake overhaul parts - where from?

Hi Guys and Gals,

Currently got the callipers off of my 06 pointy, ready for a damn good service. Where's the best place you could suggest to pick up replacement rubber seals for the pistons (if needed), and the washers that seal against the banjo joint on each calliper?

Love you all!

Roberrrrt

23-01-12 04:48 PM

Re: Brake overhaul parts

Try this...

http://lmgtfy.com/?q=sv650+brake+seal+kit

;)

Sid Squid

23-01-12 05:10 PM

Re: Brake overhaul parts

Suzuki dealers sell Suzuki parts.

TamSV

23-01-12 05:13 PM

Re: Brake overhaul parts

Local Suzi dealer or Robinsons Foundry for OEM. Wemoto for pattern seals. I've used both before with no mishaps (although I prefer to use OEM).

Take the calipers apart first though and check what you need, they might well be OK.

Get the copper washers from any motor factors or from ebay. I usually get 20 at a time so I've always got them in.

You can re-anneal them by heating them with a blow torch until they glow red but, TBH, they're pennies so I always just use new.

Dave20046

23-01-12 05:37 PM

Re: Brake overhaul parts - where from?

wemoto?

TamSV

23-01-12 08:32 PM

Re: Brake overhaul parts - where from?

Wemoto

andrewsmith

23-01-12 08:44 PM

Re: Brake overhaul parts - where from?

Used wemoto seals in my front and they're fine and I've done 12k with the seals.

As Tam for the copper washers

All times are GMT. The time now is 10:18 PM.