01 plate curvey and spare race engine
 

01 blue sv650s 24600 miles good condition,beowulf end can tax and test(not sure how much ill check when im at home)
also track engine i bought for a project a year ago which i never fitted only done 2 short track days since a £1500+ rebuild including wiseco 675 piston kit ,ebc heavy duty clutch,carbs jetted to suit,carbon engine covers
wanting £1400 for a quick sale for bike and spare engine, bargain!
the last time i ran the bike i changed the front sprocket to 1 tooth less and the bike was making a slight whining noise,but im pretty sure this is just the sprocket,
not been used much due to personal circumstances

£1400
any interest??
im in rotherham
edit tax and test until may(less than 200 miles since last test)

Re: 01 plate curvey and spare race engine
 

offers?
£1000 for bike

Re: 01 plate curvey and spare race engine
 

Hi Im defo interested but would like some pics? It's quite a long way from Bristol, just checked, going to cost about £100 to come and get it....

Re: 01 plate curvey and spare race engine
 

hi ill try and get some pics up later,and if you give me your email address i can send you loads of good quality close up pics aswell
cheers for the interest

Re: 01 plate curvey and spare race engine
 

some pics of the bike(if they work)
http://profile.imageshack.us/user/brady888/

Re: 01 plate curvey and spare race engine
 

yea it looks all good mate. can you give me a bit more info on the sprocket noise?

Re: 01 plate curvey and spare race engine
 

dont know what the whining noise is but it started the same time i changed the front sprocket for a 1 tooth less
(only done about 50miles since) i just assumed it must be the new sprocket as the actual size is smaller and the chain is standard but not sure ,any ideas anyone?
doesnt effect anything at all,but its best to be truthfull

Re: 01 plate curvey and spare race engine
 

hi, i have been speaking to my friend who is studying motorcycle engineering... he thinks the whining is probably that the chain is too tight or the wheel isn't aligned properly....?

Re: 01 plate curvey and spare race engine
 

any interest? £1000 for bike £350 for track engine
dont really want to break the bike for parts as its in too good condition
been over bike and if you look a pics there is a very small chip on tank,couple of cracks on clock faces and a small crack on rh side fairing but this is on the under side and cant really be seen

Re: 01 plate curvey and spare race engine
 

Hi bagger, I'm interested, just would like to iron out the whining issue. check my above post. Also does it make the noise all the time or just when moving?

Byron