Stuck crash bung piece help!
 

Hi, After removing my crash bungs (i dont know which make they are) from each side of my bike there was a piece that didnt come off the right side. This piece seems like its jammed and i need help removing it. I have put some pictures of how its stuck and the same piece which came off the left side.
Any help would be highly appreciated

p.s sorry for the bad picture quality

Re: Stuck crash bung piece help!
 

Mole grips :D

http://thumb18.shutterstock.com/thum...e-45195037.jpg

Re: Stuck crash bung piece help!
 

nope they didnt work :(
i couldnt really get a strong grip on the piece

Re: Stuck crash bung piece help!
 

A small amount of heat should do it. Don't hold it on it though metal expands when hot.

Or, is that a starkey in the side of the spacer? try to turn it & prize it out slowly. take your time & watch your frame one scratch on a black frame your nackerd.

Re: Stuck crash bung piece help!
 

How much is a small amount lol sorry for the noob question how am i going to heat it up?

No its not a starkey just a mark from the mole grip, I just cant see anyway its going to turn because its not sitting in there straight.

Re: Stuck crash bung piece help!
 

Can you knock it straight with a bit of wood and a hammer? If you do maybe it will just come out like the other. Mind your frame!

Re: Stuck crash bung piece help!
 

I tried knocking it off with something else but it never worked, ill give that a try too hopefully itll work :)

Re: Stuck crash bung piece help!
 

a quick tap with a hammer? also maybe squirt some wd40 on and let it soak a bit 1st.

Re: Stuck crash bung piece help!
 

Tap a thread in it and slide hammer it out.