Curvy wheel spindle sizes?
 

Hello I am going around in circles on the internet trying to find the spindle size front and back for the Curvy SV

seen post saying it is 17mm front and back and others saying it is 20mm and others saying 19mm

so getting a bit threaders at the minute

does anybody have any in the shed they can check by slipping a spanner over the shafts?

Thanks

Adam

Re: Spindle Sizes
 

people are probably confusing spanner sizes with the shank diameters, spanners are front 17mm, rear,20mm with the spindle diameter of 17mm front and rear that is if it is a carby. hope this helps.

Re: Spindle Sizes
 

Good morning.


17mm front, & 22mm rear.


Cheers.

Re: Spindle Sizes
 

disregard my post had a senior moment getting confused obviously picked up the wrong spindles in the garage I will have to actually measur the two I have sat on stands.

Re: Spindle Sizes
 

So 17mm for the front and 22mm rear for a curvy

Thanks Guys looking into supermoto wheels and trying to guess what can be bodged to fit lol

Re: Spindle Sizes
 

No, curvy rear axle is 17mm . Not sure if there was change later with the pointy.

Re: Spindle Sizes
 

The rear nut is a 22 and the front spindle is a 17mm flange head

Re: Curvy wheel spindle sizes?
 

reet so its 17mm shaft diameter front and back

cheers guys off to trawl the bay for supermoto wheels

Re: Curvy wheel spindle sizes?
 

Its best to get the verniers out and measure them!

Anyways you could always give someone like these a shout and see if they can make you a set of hubs up!
http://www.radmfg.com/Motorcycle-Hub...treet-s/12.htm

Re: Curvy wheel spindle sizes?
 

Cheers Andy having a look now