Pointy won't start - no electrics.
 

I tried wiring in the new LED resistors for the new LED indicators on the rear, wired them in series with the LED's and wouldn't work. Instead it appeared to short out my battery. I suspect that a loose wire touched the chassis. Woops.

Anyway, when I turn the key in the ignition, nothing happens. At all. No lights, no whirring. Absolutely zilch - as if there was no battery connected. ( It was running fine before I did this )

My first thought was a fuse had blown, so I checked all the fuses I could find in the fusebox, all of which were intact?

I'm at a complete loss, does anyone have an idea why it doesn't work?

Fairly urgent as I rely on the bike for transport at the moment...

Is it worth attempting to charge the battery? Not sure how all its charge would have dissipated in a split second though?

Tim

Re: Bike Won't Start - HELP
 

Have you accidentally tripped the kill switch? Happened to me once, couldn't believe I didn't notice immediately what the trouble was! lol

Re: Bike Won't Start - HELP
 

No I didn't I checked that.

Even when the killswitch is engaged, the bike's electrics will still turn on. But nothing happens at all.

Re: Bike Won't Start - HELP
 

http://i214.photobucket.com/albums/c...dImage-1-1.jpg

Starter relay has a separate fuse if I remember correctly, check that out

hope this helps...

Re: Bike Won't Start - HELP
 

I think I'm going to need more knowledge than 2 years of engineering at uni so far to decipher that!

Re: Bike Won't Start - HELP
 

What bike? If curvy have you checked main 30a relay fuse? Right hand side near seat infil HTH

Re: Bike Won't Start - HELP
 

Sk3 2nd gen pointy

Re: Bike Won't Start - HELP
 

I'm talking about this part...

http://i56.photobucket.com/albums/g1...100_2137-1.jpg

Re: Bike Won't Start - HELP
 

Where is that on the SK3?

Re: Bike Won't Start - HELP
 

Sry I uploaded a better picture showing where it's at...