SV650.org - SV650 & Gladius 650 Forum - Idle Speed for 2005 pointy?

SV650.org - SV650 & Gladius 650 Forum (http://forums.sv650.org/index.php)

- SV Talk, Tuning & Tweaking (http://forums.sv650.org/forumdisplay.php?f=111)

- - Idle Speed for 2005 pointy? (http://forums.sv650.org/showthread.php?t=186669)

zombie

03-11-12 08:07 PM

Idle Speed for 2005 pointy?

Hi

Mine is just under 1,000 revs. It has been cutting out lately and this may be why?

What is the "correct" position and how to adjust please?

I have seen some older threads on this, but not for this model I think.

Cheers

Bibio

03-11-12 09:06 PM

Re: Idle Speed for 2005 pointy

tickover screw in left hand side of frame trellis just under main rail and middle of tank area.

Beetrootkiller

03-11-12 11:25 PM

Mine ticks over around 1800-2200 when cold and 1200-1400 when warmed. Under 1000 does seem a little low.

Stenno

04-11-12 04:22 PM

Re: Idle Speed for 2005 pointy

Quote:

Originally Posted by Bibio (Post 2793480)

tickover screw in left hand side of frame trellis just under main rail and middle of tank area.

As above, 1200rpm at running temp. Once set you may want to check the TPS too...
http://forums.sv650.org/showthread.php?t=55459

unclepoo

05-11-12 09:58 PM

Re: Idle Speed for 2005 pointy?

I like my tickover to be set a little high at about 1400rpm as it helps reduce the high engine braking in lower gears.

andrewsmith

05-11-12 10:36 PM

Re: Idle Speed for 2005 pointy?

about 1200 rpm +/- 100 to 200

Bibio

05-11-12 11:08 PM

Re: Idle Speed for 2005 pointy?

Quote:

Originally Posted by unclepoo (Post 2794169)

I like my tickover to be set a little high at about 1400rpm as it helps reduce the high engine braking in lower gears.

if it's a pointy then try setting the TPS properly and balancing the TB's.

pointy fast idle is around 1800 and tickover when warm is 1300 which is about 10-20 seconds after cold start.

All times are GMT. The time now is 05:31 AM.