Breaking - Modified Curvy Front End
 

http://i1117.photobucket.com/albums/...psb3bb5a88.jpg
http://i1117.photobucket.com/albums/...psee3ce72a.jpg
http://i1117.photobucket.com/albums/...ps7f4999c8.jpg

Forks- Internals- 0.85 Ktech Springs and Debruix Emulators. Spacers cut by around 10mm if i remember correctly to get the sag set at a decent level. I did the mod last spring around the time of the first debruix group buy only selling as I have purchased a GSXR front end. The legs could do with a polish, it was done years ago and has faded a bit now. Original Springs included.
£150 Collected

Used Galfer braided lines. Two seperate lines and a longer banjo bolt from the MC.
£20 Posted

Sv650s Master cylinder £25 posted

Clip ons (once i can remove the bar end weights) £15 each posted.

One silver badly dinged front wheel £10 collected SOLD

One very mildly dinged (hard to see the fault) graphite/black front wheel with small scratch SOLD

Spindle £8 posted

Michelin Pilot Road part worn tyre 1/2 life left 120-60-17 £35 posted SOLD

Ive got the brakes too newly rebuilt but ill wait till i add photos tonight to explain about those.

Re: Breaking - Modified Curvy Front End
 

Added some pictures.

Re: Breaking - Modified Curvy Front End
 

Would you consider selling the fork internals separately if no-one wants the front end as a whole?

Re: Breaking - Modified Curvy Front End
 

Possibly, ill give it a few more days!

Re: Breaking - Modified Curvy Front End
 

If you decide to split the front end I'd be interested in the front mudguard if its cheap enough.

Re: Breaking - Modified Curvy Front End
 

i might take the forks with out the internals , depending on price if you split them , let us know , thanks

Re: Breaking - Modified Curvy Front End
 

If you will split the front end , I'm interested in the forks.
You have PM also