Indicator on the blink
 

1. Had to replace both lefthand indicators housings. :(
2. Had to crimp new connectors on rear indicator. :)
3. Wiring connections for the front (seem) okay. :)
4. Turn on indicators. :D
5. Front indicator, nothing. Rear indicator blinking too fast. :x

Is this due to my new connectors :?: Is the fast blinking because the front one isn't working :?: Why isn't the front working? :cry: :cry:

Any ideas, would be gratefully appreciated.

It's because the front isn't working. Probably connections or could be a bad bulb. Take a front one off and try it on a working back.

check contact on the bulb...did u replace them?
Also check the bulb is fully inserted in the cassette and making contact.

my flasher had an problem, one not working every now and then...
After takin the unit part discovered that the bulb contact was covered black carbon.
simply clean off carbon with sandpaper, or buy new bulb (no more that £1.50), spare always handy to have under the seat.

Will try advice, thanks.

Nutkins