Dynojet stage 1 and 3 kit contents
 

I just picked up a Stage 1/3 kit from DJ for the princely sum of £15 (well, it's missing one pair of jets but still, got all the other bits still in their wrappers, thanks UBG!) and since I've always wondered what was actually in it, I thought other people might be interested...

Instructions and suggested settings
2 x DJ stickers
2 x slide springs, which seem stiffer than the stock ones
2 x needles- don't know how these differ from stock yet
2 x needle springs, e-clips and washers- in case you lose any stock ones I assume.
1 x #54 slide drill- the right size to drill your slide holes, and tricky to find
various mains- 134, 138, 140, 144, 180, 185 (the huge mothers are meant for stage 3 kits- no airbox, individual filters, raised tank)

And a nice wee box.

From everything I've read and absorbed, the jets enclosed will be no use for anyone with a good filter and system, which seems a bit off for a product that costs about £70 new...

I didn't get half that stuff in my stage 1 kit.
No springs at all and I think 138 jets were largest. Which I fitted and with the K&N and can runs really sweet. I'll see what she does when I do the cams next year.

Mmm, this kit recommends 144s for a race can and K&N... which would explain why my kit is missing the 144s :)

How much you want for the 140 mains?

The first kit they did for the SV part no. E3171.001(stage 1) only came with 132,134,136 & 138 main jets , fuel needles , e-clips, adjusting washers and slide drills.

The markII version so to speak is part no. E3171.002(stage 1&3) is what northwind has just listed the contents. Maybe the dealer you bought yours off still had the first version when you bought yours.

Cheers
Ben

Bought my kit of somebody on here I think.
Nevermind runs well that's what matters.