![]() |
Where to get suspension work done?
Hi Guys, was wondering if anyone could recommend anywhere in the Oxfordshire area that could put some uprated springs + oil in my forks, and set the suspension up.
Cheers, Alex |
Do it yourself. If you're not sure what you're doing, people on here can help. 8)
|
If you want the best job possible doing take it to MH Racing in Calne. The guy really knows his stuff I use him to rebuild the Ohlins on the VFR
http://www.mhracing.com/ |
For what you want done though, it's perfectly possible that you could do the best possible job... It's dead, dead easy. The pros would do you much better work with a more adjustable setup, but assuming you've decided what oil you want there's nothing they can do that you won't.
|
I could give it a go, but, other than a rear paddock stand which isn't much help, I don't have any way to raise the bike off the ground. Was looking at 'Adam's SV' pages at the guide and thought I could have a go, I guess I'm just nervous taking it all apart :?
What weight oil is recommended? I've got a K4 GSXR-1000 shock to go on the rear... Cheers for the advice :) |
Where 'bouts do you live?
|
I live in a village about 5 miles west of Oxford on the A40. :wink:
|
You want an Abba stand... Bloody brilliant things. I probably use mine more than most but even so I reckon it had proved its worth after one shock swap and the first time I worked on the front end, just from stability and safety. You can do the front end just with a rear stand and bottle jack, but even with extra supports/roping I'd still be paranoid of it falling.
Not cheap, sadly, but you can't have everything. |
Ah, bit far to borrow my stand then.
I've go an NWS stand, better than the ABBA stand because its got a backstop so it cant move at all 8) |
All times are GMT. The time now is 02:54 AM. |
Powered by vBulletin® - Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.