GSXR foot rest hangers on K4 SV
 

Hey all,

After my little brake grabbing road splatting exercise, I seem to have bent the r/h peg hanger and obviously broke the brake lever.

I've found a set of left and right GSXR600 hangers, they're listed as K1 - K3.
I've asked what the bolt spacing is. Looking at them, I think it should be about the same as the SV at 55mm.

Can anybody think of any other problems? I obviously don't want to pay out for brand new hangers, and I can't find SV ones.

Anybody?
I know the gear shift rod will probably work out as the wrong length, but I can get that sorted easily enough.

Should I just buy them and make a bracket to get the bolt spacing right if it's not?

I'd seen that one.
The K3 ones are different, I know that much.

Michael.
JHS Racing in Bristol are selling K4 rear foothanger/heelplates at £60 a pair brand new. I'm guessing that they are selling off front sets as well because they replace them on the race bikes they build.

Thanks for the tip, Leigh, I'll give them a ring.
I'm hoping to try and save myself as much money as possible and since I'm going to be messing about the placement of the hangers to get my riding position right, I think I might just get the gsxr ones and see what happens.
Plus, they look a bit snazzier.

Let us know how you get on won't you :?:

Of course.
I have access to facilities for making an adapter plate and I can get a shift rod sorted, so I'm not terribly worried about fitting them.
Only reason I asked about them is just in case there is something major that just hadn't occurred to me.