Bellypan brackets - help required.
 

Got hold of a pyramid bellypan which is missing fixings. No way I'm paying pyramid £40 for a new set, but any pictures, scans of fitting instructions or descriptions would assist in my bodging together some replacements :)

TIA

my powerbronze belly pan is held into place by 4 metal brackets which fit on to the engine,just bolt 4 on and bend them to match the b pan.
i can get a pic of my b pan if it would help?
daz

They go behind existing bolt heads in the crankcase/clutch cover/whatever is nearest then?

yes,i'll try and find a picture out for you.
daz(midlands)

Ah, cool. That helps a lot, thanks.

this is the best i can do mate! sorry i cant be of anymore help.
daz(midlands)
http://www.thebikereview.com/iup/get8.asp?ID=476

Great, I'll work it out from there. Thanks for your efforts. I appreciate it.

My belly pan was mounted higher up, such that the oil radiator was resting on the bottom of the belly pan side cutouts and has slightly destorted the plastic :( .
I have moved the brackets to the position as indicated on your photo Daz (kwak zzr) :) , but I can''t make out where the brackets go on the gear pedal side. I don't want to cut the bracket until I am sure I have it mounted in the correct casing bolt postition. So do you (or any one else) a photo from the gear pedal side :?:
Ian

i'll sort one out but it will take me a day or so.
daz

:thumbsup: cheers mate it'll be appreciated