CCC High Level and standard rear end
 

Will installing a CCC High Level Cancause any prob with the standard rear end on a curvy? I'm not sure about the indicators and numberplate (8x6). What happens to the rear footpegs?

Photos would be great.

Thanks all.

Not sure about that specific exhaust, but I'm wandering how much clearance you'll have with the standard indicators and a high level can ?

I could be wrong but I think you definitely lose the rear foot pegs.In addition even if they do not touch the new exhaust the rear indicators will not look right.Tine to get some bullet types mate. :wink:

If you lose the peg you can make some spacers up out of lengthend bolts and nuts so the peg clears the can.

As for the number plate if its standard yes it will be a problem. Either get a smaller one made or mount it off center (what I did). If there isn't enough clearence between the exhaust port and the plate it will melt in less than 5 minutes, and yes that is experiance talking :oops:

Of course I won't be keeping the standard indicators in the long run. Just wondering whether I can get the can first, then change the indicators. The plate is 8x6, so I think that should be fine. But where does the outlet rest w.r.t. the indicators? below?