ZX636 shock for a curvy?
 

Lots of posts on this one! I do not really want to use an R6 battery which year/model of 636 shock can I use? I am no lightweight so the SRAD unitwont suit!!!

ZX636 B1H or ZX10 03-04 shock

If you use a ZX636 pre B1H then the battery will have to be put under the rear seat.

So is the B1H shock a straight bolt on, without having to relocate anything/cut anything off?

The battery tray needs to be slightly trimmed with both shocks. But using the B1H shock, there is enough space above the shock to place the battery on is side above the shock using some foam blocks to support it, but you have to remove the fuse tray. Plus the B1H shock is newer than the A1P (i think its A1P).

A1P is the model directly before B1H. It's the older larger ZX6R, first of the 636's.

This is an A1P shock
http://i13.ebayimg.com/01/i/05/cf/95/3c_1_b.JPG

This is a B1H shock (it not an actual B1H shock, it an aftermarket but it shows you main diffrence between the two).
http://i10.ebayimg.com/01/i/05/da/60/fd_12_sb.JPG