Clutch thingy for a curvy, 1999...
 

or "screw assembly, clutch release" according to the parts fiche.
Its the gadget that turns the "pull" of the clutch cable into "push" on the clutch rod. I took mine off to clean it and a load of little ball bearings fell out... I put as many as I could back in and it does still work but is a bit "grabby". Brand new is £31 from Suzuki.... if anyone has a good one out there?.....
Adam.

I think i may well have one laying around. I'll check over the weekend.

Nice one, most grateful,
Adam.

Re: Clutch thingy for a curvy, 1999...
 

Can't you just get some ball bearings? easy enough to take it apart, grease it up and reassemble with new ones.

Re: Clutch thingy for a curvy, 1999...
 

Easy enough if you have the fingers of a 5 year old maybe. :cry:

Luckily my partner has. :D

Should be a warning on the flipping outer casing.

Re: Clutch thingy for a curvy, 1999...
 

Im not sure how they fit back in and I dont think they are supposed to fall out when you remove the release, therefore I think its worn out. Im not sure of size of the ball bearings and how many there should be , I think some were missing before I took it off... if DirtyDog doesnt have a spare I will have to get a new one.
Adam.

If they are the same as the fuel injected bike (can't see why not) I have a couple kicking around somewhere.

Right i found it, unfortunately it had all come apart and the bearings have gone AWOL :shock:

sorry

over to you mike :wink:

Hi Mike, if you have a complete one can I buy it from you?
Adam

Clutch thing for a 1999 curvy - SORTED, thanks Mike.
 

Got one from the excellent Mike, many thanks for all who offered help.
Adam.