modification
 

Hi there,just a quickie...perhaps i aint looked properly but this modification for the
2nd/3rd gear restrictor,any idea if this applies to an 03 pointy too and if so is the procedure the same...many thanks

yes i belive it works better on the k3.. its a plug in device.. ie "g-pack" its also called a timeing retard eliminator...

as far as im aware...

Cheers
Alex

Not worth spending money on, by all accounts...

DOH!!!..just found it on the How to page.this begs the question..if i couldnt see it first time around..am i smart enough to give it a go...lol
cheers anyway

I have herd that the G-Pack does more than just a TRE mod. Rictus has opened it up but was full of resin.

yup spend your money elsewhere..totally not worth it plus why bother with buying a bike with fuel maps for each gear and then go and remove it!!.

I would like someone to honestly say they notice the retard!.

Well it livend up my K3 no end and my Busa is horrid to ride without it.

Indeed, picked up a g-pak for £15-20, can't rightly remember, I was intrigued to find out just what was inside, unfortunately it's resin filled (still got it somewhere), tried it back to back with the wiring mod and without, and although not a massive difference, it did make the bike more responsive.

I think they are about the £100 mark and nowhere near good enough to justify that sort of money.


Cheers Mark.

You don't need a 'G-Pack' :roll: You just need to fit a resistor across two points in the electrics under the seat :!:

'Ophic' will tell you the resistor size & where/how to fit it ;)

I did this TRE mod on mine & it made a hell of a difference (yes, this mod is still fitted Si-Dall ;))

Look in the FAQ's & How To's on the main site and it appears about a page down, click on the link and there are instructions and pictures etc.

Good luck!