SV650.org - SV650 & Gladius 650 Forum

SV650.org - SV650 & Gladius 650 Forum (http://forums.sv650.org/index.php)
-   SV Talk, Tuning & Tweaking (http://forums.sv650.org/forumdisplay.php?f=111)
-   -   Panels Annoyed (http://forums.sv650.org/showthread.php?t=67167)

Grinch 02-03-06 12:06 AM

Panels Annoyed
 
I've just found out that the panels on a 99 svs are different from a 01 svs, there is an extra tab on the front. That's bloody annoying.

21QUEST 02-03-06 12:08 AM

Re: Panels Annoyed
 
Quote:

Originally Posted by Grinch
I've just found out that the panels on a 99 svs are different from a 01 svs, there is an extra tab on the front. That's bloody annoying.

...and why is it annoying? It does not make a difference , fitment wise AFAIK.

Cheers
Ben

Grinch 02-03-06 12:18 AM

Re: Panels Annoyed
 
Quote:

Originally Posted by 21QUEST
Quote:

Originally Posted by Grinch
I've just found out that the panels on a 99 svs are different from a 01 svs, there is an extra tab on the front. That's bloody annoying.

...and why is it annoying? It does not make a difference , fitment wise AFAIK.

Cheers
Ben

yes it does.. as a panel from a 01 will not go on a 99... it works ok the other way round but thats not what I wanted. :cry: well unless I hack the tab off which I'd rather not.

Scoobs 02-03-06 07:51 AM

The panel actually changed in 99. I got a replacement panel and I had to do what Ben said. Hack the little fecker off. It will be fine. Use a sharp blade. Piece of cake.

Grinch 02-03-06 10:13 AM

Quote:

Originally Posted by Scoobs
The panel actually changed in 99. I got a replacement panel and I had to do what Ben said. Hack the little fecker off. It will be fine. Use a sharp blade. Piece of cake.

But I don't want to hack it off... I was on;y putting it on while I was waiting on the plasti-tec to arrive... I've bodge it now. :)

jambo 02-03-06 10:16 AM

Right this cropped up a while back when Benji was ordering tabs, a 2001 centre pannel will take a '99 side pannel fine (as there's a slot but no tab) but not vice-versa.

As this is not documented on any Microfishe etc, Benji managed to blang a centre and additional side fairing for next to nowt by emailing into suzuki and being indignant and asking for other plastics to fit it. Worth a shot as you can reasonably say you don't want to hack the tab off as it would be down to you to check you didn't screw it up, and if you dammage the pannel you're left out of pocket.

Grinch 02-03-06 10:23 AM

Quote:

Originally Posted by jambo
Right this cropped up a while back when Benji was ordering tabs, a 2001 centre pannel will take a '99 side pannel fine (as there's a slot but no tab) but not vice-versa.

As this is not documented on any Microfishe etc, Benji managed to blang a centre and additional side fairing for next to nowt by emailing into suzuki and being indignant and asking for other plastics to fit it. Worth a shot as you can reasonably say you don't want to hack the tab off as it would be down to you to check you didn't screw it up, and if you dammage the pannel you're left out of pocket.

Cool thats a plan... :D

jambo 02-03-06 10:44 AM

Worked once, may well work again :wink:

northwind 02-03-06 05:44 PM

Ah, I thought I'd got an SV400 panel. I got one with one less tab.


All times are GMT. The time now is 08:30 AM.

Powered by vBulletin® - Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.