![]() |
Bitz & Peices
All bits are for pre K2 bikes, bits are from a 02' bike though apart from the pointy brake lines.
Jackup dog bones (20mm seat lift & 40mm rear lift approx). - £12 posted. Carbs (fuel mix screws have been damaged, but are set for normal jetting) - £20 Pointy Stock Brake Front Lines - £10 Curvey Stock Brake Front & Rear Lines - £10 Fuel tank (without fuel cap/valve/sensor) crash damaged on left side, all intact & still holds fuel and with baglux cover is not noticable, usefull for racers. - £20 Kwak ZX6 A1P shock - £25 Rear subframe, only good for project or racing. The regulator mount has been removed & rear lock mount has been damaged. Clock surround, i have one painted in Y9F, all intact but it was left outside for a long time so is a bit mucky and weathered & possably need repainting I have some other plastics that i may want to get rid of. Front Forks (Right ok, Left stanchon has a small crease but was straightened as much as possable, has 10w fork oil and prog springs with preload caps installed & stock springs (boxed), fork lowers are in good condition) - £80 [GONE - Pending Payment] Front Yokes (Top & Bottom) - £25 Clipons - £20 (Pair) OEM Full Exhaust System (20k) - £10 OEM Undertray - £10 GSXR SRAD 600 Ignition + Fuel Cap with 1 key (should work on SV) - £20 GSXR SRAD 600 Uprated fork springs - £25 GSXR K2+ Calipers & OEM Lines - £40 Oh and also loads of bits from an RF400 |
Re: Bitz & Peices
Quote:
Check on the end of the springs . Afternarket springs usually have the rates engraved on the flats. Cheers Ben |
Re: Bitz & Peices
Quote:
|
Hi will the undertray fit an SK1 model?
|
Quote:
|
Quote:
And how much will postage be? Cheers. |
Quote:
|
Cool I'll take it, how much is postage to Leeds?
Cheers. |
FRONT FAIRING
Hi do you have the left front fairing there intact mate cheers
|
All times are GMT. The time now is 04:46 PM. |
Powered by vBulletin® - Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.