![]() |
Any ideas (photos included)
ref above
My front discs are rotten! They are spoiling an otherwise very tidy bike. http://upload4.postimage.org/231454/Picture_10_.jpg http://upload4.postimage.org/231457/Picture_11_.jpg http://upload4.postimage.org/231463/Picture_12_.jpg Is there anything I can do to prepare/paint them? Can't afford new discs. :cry: Thanks |
Mask the brake surface of and spray with hammerite primer then a couple of top coats of hammerite gold!!! oh and don't forget to clean it first with thinners :thumbsup:
|
Use paint stripper to remove the black paint, get a nice 'machined look' like on my GSXR wheel for my front end swap
http://www.tt-forum.co.uk/gallery/khewett/DSC00489.JPG A wire brush or wire drill attachment should shift the rust. Soak the disc bolts in viniger or paraffin for a few days will tidy them up. |
In the short term, steel wool to remove the rust. Mkae sure you clean all the debris off afterward.
|
cheers gang
as soon as the weather cheers up i will try these suggestions letya know how i get on :lol: |
All times are GMT. The time now is 12:10 AM. |
Powered by vBulletin® - Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.