Raised bars for the faired version.
 

How easy is it to put a set of 650N bars on a 650S.

The reason is that i'm going touring in the summer and while i normally love the sportier position i found it a bit uncofomatable when touring, and the speeds are lower.

It need to be an easy change over thought, i want to be able to put the same controls on without changing cable lenghts etc.

Cheers

And whilst were on comfort do suzuki make the gel seat for the K3 of is the seat only for the latest models?

Hi, cannot speak for the gel seat for your K3s, but if you have a look at the Busters, Demon tweaks and M&P catalogues there are a number of kits which will allow the use of flat bars on your bike....not cheap mind...Bandit Mania also sell a kit BUT I would recommend SUN risers (see services & offers on this site) which allow one to one and a half inch rise, also quite a bit of adjustment width wise AND if you fancy it they can always be lowered down the fork legs when you wanna scratch...Cost me about a hundred quid from Canada and they do not need longer cables etc etc. You gotta take a hacksaw to your existing bars though.......Have a look at their site eh
Cheers

The Banditmania riser clipons give up to 30mm in extra height but only for the K3 onwards. As the clamp is in a different position they restrict the rise on the curvy making it hardly worth while. I think they cosat £130 inc vat.
If 30mm is enough I would go for them as you can sell them and replace the originals if you sell the bike.
I found the Banditmania people very helpful.

http://forums.sv650.org/viewtopic.php?t=38690

one for sale in the sale section!

cheers i was looking for this but couldn't find it