Tank Prop
 

Hi there. Can anyone tell me exactly where to find the tank prop. I've looked and am not seeing it anywhere. I'm either being a bit stupid or I dont have one. It's a 54plate pointy 650s

Anyone able to help?

It's under the seat? Unless it's missing of course.

Yes you can get it out from under the pillion pad, just unclip it and slide it out.


.

thanks guys. is there any chance you could post a picture with a finger pointing at it?

Gets camera and lifts Tank.
It is placed under the pillion seat, on the right hand side as your looking at the back of the bike ( rear brake pedal side ). It clips in there.
http://img446.imageshack.us/img446/4...support8mj.jpg

HTH

Richie has a prop for a curvy. The pointy prop has a plastic coated ring on the lower end.

On a curvy the prop is under the pillion seat on the left, clipped into a white plastic clip and a groove moulded into the undertray plastic, on a pointy the retention method is similar but it's under the pillion seat on the right.

Zee German Swin At Zee Shop Must Av Switched It...... Swinehund, Bimmelkopf.

It's the prop for the curvy and the K3 pointy, they changed it for k4/k5, at the same time as losing the hole in the yoke nut thinky to put it in. The new ones much better for blowing bubbles with ....

HTH

Rigor