![]() |
sv forks
hi every1 im new to this forum plus i pick me sv up tomoz it needs some work ie forks but was thinking is there any front ends that bolt on off like a gsxr cause i really like the usd over the normal 1s and i rekon it wud set it off also i want to street fighter it cause they look the part as im only on a mito for the moment when i pass me test i want something special that i have costomised on me own
|
Hi Kev
Welcome to the site! There is lots of info on here about gixxer fork conversions - use the search facility or have a look here:- Click me Quite a few streetfighter conversions around aswell - not all of them intentional :lol: One tip - some of the old duffers on here don't understand text speak so if you can avoid it it will be appreciated :wink: |
Yes. GSXR srad or newer ones. Can probably fit most front ends on if you're prepared to spend the money and time. Personally, I wouldn't bother unless you could manage to get a 'complete' front end as it'd be a pain in the **** to get all the bits individually.
What sort of work needs done anyway? Replacement forks? They cost about £90-110 2nd hand. |
the bloke who had it went in to side of van at 10mph and its just pushed forks back but other than that it mint he offered it me at 350 its a 51 plate 10miles and is very cleaned he was just on the way to get moted so every thing is rite
|
Can't remember if 51 is a carbed (round frame) or fuel injected (big ugly frame) SV, but eithe rway there's fairly simple GSXR front swaps. As close to straight bolt-in as you can get and have it still be interesting :)
|
its the carbed 1 m8 also its got a blue flame race exhaust so its got to be a bargen at 350
|
also cud u tell me the excat 1s as im 17 18 in 4 days and on a limited budget lol im lookin to put about a grand into this bike shud be pritty sweet hopefully
|
£350! Yep, no joke. Even if it's a nail it's worth more than that in parts. I'd be looking for the catch ;)
For USD front: SRAD 750 yokes, top bearing from Twin Works Factory, TL1000S or LSL clipons, speedo kit from... Eh, can't remember, someone else will though. Guy in the states. Wheel off of a SRAD, TL or Busa, discs off any of those plus any more recent GSXR that doesn't have radial calipers, forks, plastics and calipers off of a GSXR750 SRAD, Y-K3. Sorted :) There's other ways of doing it mind. All SRAD is simplest. GSXR thou forks are generally considered inferior, they're KYB instead of Showa. Mine is SRAD with Y-K3 forks, for now. |
Oh ayem, and expect Mr Insurance to not like you much... The forks aren't all I've got going on but most places won't even quote for mine now :(
|
so if i get hold of a 750 srad front end it will go straigh on will i have to change the headstaock bearing aswell
|
All times are GMT. The time now is 10:55 PM. |
Powered by vBulletin® - Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.