main engine mount?
 

anyone know if the main engine mount (bar that goes right through the engine) is the same on the sv1000 as it is on the sv650? ive got to get a new one and theres one on Ebay at the moment for £7.

Not sure which of the 3 you are referring to, but here are the fiche pages + parts numbers:


SV650S
http://upload4.postimage.org/1754789/650.jpg


SV1000S
http://upload4.postimage.org/1754792/1000.jpg

Doesn't look like it. :roll:

bummer. :( they diff me thinks and it costs more for the thou aswell :(
thanks for info lukemillar. :thumbsup:

lukmillar where did you get those assembly drawings of the sv and the price lists? i noticed it is in american but it could be handy for me

yes do tell its a handy bit of info to have. :D

Sure,

I use:

http://www.bellssuzuki.com/fiche_select.asp

or

http://www.ronayers.com/fiche/GetMan.cfm

Ron Ayers have more manufacturers online, whereas Bell have better quality images. Prices do vary though when compared to the UK, but I guess you could use it as a guide. Part numbers are the same as UK though which is very handy for ordering parts here.

thanks.

why do you need a new engine mount?

Bit confused. I thought I was first reply offering you mine - probably not much use as it's a 650 strange where my post went though :?

sorry about this i'll explain :oops: the sv1000 has R&G crash protectors fitted well the alloy bits anyway underneath the fairing pannels, these are held on by removing the main engine mount bolt that goes all the way through the frame and engine and replacing it with the R&G bar and then you screw the alloy R&G holders to each side of the bike. well some numpty has threaded the bolt and i cant tighten them up so the main engine support is well looser than it should be, so i need either a sv1000 engine mount bolt or a new bar from R&G so i can tighten thing up. i have e mailed R&G about the price of a new bar but i'm still waiting for a reply.