SV650.org - SV650 & Gladius 650 Forum - Blue Flame Exhaust Fittment

SV650.org - SV650 & Gladius 650 Forum (http://forums.sv650.org/index.php)

- Exhausts (http://forums.sv650.org/forumdisplay.php?f=137)

- - Blue Flame Exhaust Fittment (http://forums.sv650.org/showthread.php?t=81034)

Blue Flame Exhaust Fittment

Hey all,

Same questions i suppose but cant find any answers,

I have just purchased a blue flame can for my curvy SV. (Thank you Silent :) )

And got the following bits

http://i98.photobucket.com/albums/l2...e/IMG_3443.jpg

Now I found the thread on the pointy exhaust fitment but looking at my exhaust i don't think i will need to cut the pipe? It looks like the rear silencer will just (hopefully) slip off?!

http://i98.photobucket.com/albums/l2...rbike/DSDS.jpg

Does that sound about right? Or do i cut the exhaust?

Just double checking before i reach for the grinder! :D

Cheers

Can't speak about the Blue Flame, but most aftermarket cans including Scorpion, Fuel and CCC require the original can to be cut off. With some you get a sleave to re-install the original can.

It should be in the fitting instructions as to where to make the cut.

that looks to me like it will slip straight on..

Looks like it has already been cut. The Blueflame should slip straight on.

See thats what i thought :D i hope so! hahah! so much easier