SV650.org - SV650 & Gladius 650 Forum

SV650.org - SV650 & Gladius 650 Forum (http://forums.sv650.org/index.php)
-   Exhausts (http://forums.sv650.org/forumdisplay.php?f=137)
-   -   Mikuni race cans (http://forums.sv650.org/showthread.php?t=81216)

Duke 02-12-06 06:31 PM

Mikuni race cans
 
I have tracked down a reasonable SV650S. It looks OK and the price is right. Though it does have some Mikuni race cans fitted -rather loud. I have searched the web and can't seem to find any info on this system.

It is a complete 2 can system without balance pipe. I am presuming that it is a race kit and not for road use.

Does anyone know this kit?
Can I fit baffles to quieten it down?
Will it (or rather should) have been re-jetted?


Thanks

Duke

Supervox 02-12-06 10:34 PM

Have you actually seen this SV or are you going by a written / verbal description ?

The reason I ask is that I wasn't aware that Mikuni made exhaust systems.

I've just done a quick 'Google' & none of the hits on Mikuni mentions cans - only what Mikuni are known for - carburetors.

Duke 03-12-06 09:58 AM

Supervox,

The bike can be seen here
http://www.cheshiremotorcyclesalvage.com/600to750.htm

It is not the cleanest, but at a good price! OK for my commute to work. The pipes exist and I can vouch for their volume!

I have left a deposit. The add and photos show the pipes.

I checked out several at DK , the cheapest was over twice the price. One at DK's had a slip on (single muffler) of the same brand.

Though that someone should know them.

Duke

Razor 03-12-06 10:05 AM

Never heard of Mikuni doing an exhaust, interesting routing on that system tho.
Have you heard the bike run? Done an HPI check on it?

Supervox 03-12-06 10:38 AM

Quote:

Originally Posted by Duke
Supervox,

The bike can be seen here
http://www.cheshiremotorcyclesalvage.com/600to750.htm

It is not the cleanest, but at a good price! OK for my commute to work. The pipes exist and I can vouch for their volume!

I have left a deposit. The add and photos show the pipes.

I checked out several at DK , the cheapest was over twice the price. One at DK's had a slip on (single muffler) of the same brand.

Though that someone should know them.

Duke

The highlighted info above & the fact that it is listed in the 'Damaged Repairables' section would set alarm bells ringing in my mind - DK are well known for their low prices.

But, then again I'm a mechanical moron with the technical & engineering skills generally associated with brain dead baboons !!

The bottom line is if you've checked out the bike & feel confident that it is what it seems & that you can get any further required work done reasonably - then go for it !! :D

As to your original question - I'd would have thought that you'd be able to get a Db Killer fitted which should reduce the noise a bit.

Duke 03-12-06 12:16 PM

As with all vehicles at this end of the market it is buyer beware. That said it looks genuine as a part exchange and not crashed bike. No tel tail scuffs on the bits that cannot be changed. I recon it will do me OK.

As for the pipe - it may have been brought directly from Japan on ebay. Odd that I can't fine a Mikuni exhaust on the web though.


It may be difficult to find a dB Killer to fit off the shelf. Do you know anyone that can make them up to suit?

As for a HP check. It may be worth it. Though the bike is a '99. What is the pest price on a Check?

Thanks

Duke


All times are GMT. The time now is 10:51 AM.

Powered by vBulletin® - Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.