![]() |
electrical connectors
i need to get ome of the origional suzuki electrical connectors. mainly for the front dash loom. anyone know where i can get them from withought spending a fortune? its for a curcy by the way
|
connectors for what? Suzuki use loads of different connectors
|
for the clocks. you get two blue connectors, very similar to some car audio connectors in some jap cars. just wondering if you can actually get hold of them from somwhere.
|
Have you got a naked?
Cheers Ben |
ah right i think i know what you mean you got a curvy naked? only ask as the frontt looms are different between the faired and naked
|
What are you trying to do? That is if it's not a secret :wink:
Cheers Ben |
well i crashed it not long ago, and decided to do it up a bit. i damaged the clocks slightly so i brought a didgital tacho and spedo, but i want to wire it up using the origional loom connections, so i can easily connect the origional clocks up to confirm the milage ect.
its a naked by the way. the speedo needs obviously an ignition lead, for the backlight and to power it up, it has internal battery so canstant is no problem. but im also making an indication panel. neutrul light, indicator ect, from LED's and want to wire those in as well so t is going to be easier to make a new loom with the same connections. |
Right, I deed something similar converting the faired loom to take a naked clock.
I can't recall exactly how I did it right now. Basically consisted of robbing blocks of a spare loom then. I did have to swap one of the blocks on the clocks by removing the pins from the block and putting them into another block. Get a clear pic of the connecting blocks(main loom) that go into the connecting blocks on the clock and I may be able to point you in the right direction for a solution. Cheers Ben |
Whole looms aren't expensive, I got my spare for a fiver :)
|
i only really need the connectors with loose leads coming out of the end, as im wiring them all in seperatly and it will make it a lot easier. im thinking of just hacking the thing now. im getting peeved off trying to find the right conenctors. ill post a pic when i get home tonight to show you the conenctors i mean, cos i think they go straight into the clock circuit board.
|
All times are GMT. The time now is 11:01 AM. |
Powered by vBulletin® - Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.