Belly pan that will allow room for micron headers
 

I was looking at a skidmarx belly pan but they are not hollow underneath so i think it would foul on my downpipe, does anybody have a belly pan on their curvy that looks like it would allow room for the lower pipe? If so which one as I need to buy one.

Chris

Re: Belly pan that will allow room for micron headers
 

mine was skidmarx and it just fitted, the pipe touches the bottom near the middle, not an issue though

Re: Belly pan that will allow room for micron headers
 

Does it not melt the plastic?

Re: Belly pan that will allow room for micron headers
 

The skidmarx pan is made from fibreglass, with a resin outer coat. Shouldn't melt.

Re: Belly pan that will allow room for micron headers
 

Not realy "melt", but it does become brittle and cracks, but as its on the underside you cant see it, if you wanted you could cut out the belly pan a little to acomodate the pipe like on other bikes.

Mine has cracked and become a little brittle where the pipe touches the pan, but i cant see it so its not an issue.