Angle Grinder - Exhaust Removal - Will this do the job?
 

As the title asks, will this Halfords 860W Grinder (£14.49) be OK?

http://www.halfords.com/webapp/wcs/s...category_33943

Cheers

Re: Angle Grinder - Exhaust Removal - Will this do the job?
 

It certainally will just don't forget to cover the swing arm and paintwork!

Re: Angle Grinder - Exhaust Removal - Will this do the job?
 

definitely, the sparks can damage the paintwork too. Worth covering everything up :)

Re: Angle Grinder - Exhaust Removal - Will this do the job?
 

i used a large piece of cardboard between exhaust and swingarm.

Re: Angle Grinder - Exhaust Removal - Will this do the job?
 

I used a hacksaw and two blades.

The feeling of accomplishment after 30 minutes was well worth it! :cool:

(Oh and total cost approx £5)

Re: Angle Grinder - Exhaust Removal - Will this do the job?
 

yeppo it can be done with a hacksaw

so you could save some cash

owever- for £15.. every man should own an angle grinder

Re: Angle Grinder - Exhaust Removal - Will this do the job?
 

Although it'll get threw most of it without a problem, as It's only a 4 or 41/2 inch job it won't reach all the way so you may need to cut the last bit by hand (or go from the top then bottom).

Cheers Mark.

Re: Angle Grinder - Exhaust Removal - Will this do the job?
 

Just the one? Like all good tools a set of different sizes is better, 1 1/2", 4", 4 1/5", 7" & the daddy 9", it's all good.:D

Re: Angle Grinder - Exhaust Removal - Will this do the job?
 

Or a 12" still saw:cool:

Re: Angle Grinder - Exhaust Removal - Will this do the job?
 

UKI..

I am only up the road from you ..
Butt Lane.. near red bull lights..

you can borrow my grinder if you wanna save the dosh !.. no problems.. mind u £15 is a bargain.. itll cost u £5 in petrol to get to me and back huh!.